Tickbook

Tickbook setup guide

Last updated: 5 October 2026

How to use this guide: do the steps in order. Every step ends with "Check it worked". Don't move on until the check passes. Each step also marks where its screenshot will go. The whole thing takes about 30–45 minutes.

Tickbook's Home page has a Getting started checklist with the same steps. Each one links to its part of this guide. Stuck? Email support@tickbook.uk. Common questions are at tickbook.uk/support.

Part 0: Before you start

You need:

Decide first where your accounts are kept. Tickbook can work in two ways, and you choose once:

You can only switch to Xero while Tickbook has no accounts of its own. Decide before you add any.

Part A: Tickbook keeps the accounts

A1. Install and approve the plan

Step 1. Install Tickbook. Install Tickbook from the link we sent you (or the Shopify App Store, once it's listed). Shopify shows what the app needs access to. Press Install.

Check it worked: Shopify moves on to the plan.

Screenshot: Shopify's install page for Tickbook.

Step 2. Approve the plan. The plan is $49 a month, with a 30-day free trial, billed by Shopify with your Shopify invoice. Approve it. On a development store it's a test charge and is never billed.

Check it worked: in the Shopify admin's left sidebar, under Apps, Tickbook opens the Tickbook Home page with a Getting started list. Settings → Plan says how many days of the free trial are left.

Screenshot: Tickbook's Home page with the Getting started list.

A2. Settings

Tickbook → Settings, or Open Settings on the Getting started step Set your reference and due-day settings. Work down the page, top to bottom.

Step 1. Reference. In What you call the reference given with an account sale, type the word your customers use, for example PO number, Job or Order number. Tick A reference is required for every account sale if you always need one. Shopify POS doesn't let apps block a sale: a sale without a reference still goes on the account, and Tickbook lists it under Exceptions as "Reference missing".

Check it worked: the field shows your word. The till, receipts and statements use it.

Screenshot: the Reference section of Settings.

Step 2. Statements and due dates. Set Statement day (day of the month, 1 to 28), for example 1, and Charges are due this many days after the statement date, for example 30. Dates are counted in your shop's time zone, shown under the fields.

Check it worked: the two numbers are in the fields (they're saved with step 6).

Screenshot: the Statements and due dates section.

Step 3. Point of sale. Allow account sales while the till is offline or can't reach Tickbook (checked against the last known balance) is ticked to start with. Leave it ticked unless you'd rather refuse account sales when the till has no internet.

Check it worked: the box is as you want it.

Screenshot: the Point of sale section.

Step 4. Phone orders. Tick Put phone orders on account only if you take trade orders by phone and create them in the Shopify admin with Payment due later. Leave it off if you use Payment due later for ordinary invoices.

Check it worked: the box is as you want it.

Screenshot: the Phone orders section.

Step 5. Part payments. Tick Part payments go on the exceptions list if you want to review every part payment.

Check it worked: the box is as you want it.

Screenshot: the Part payments section.

Step 6. Save. Press Save under Part payments. (What happens to online orders that don't fit is now chosen on Pay on account online, step 3: see A7.)

Check it worked: a green "Saved." message. Reload the page: your values are still there. On Home, the Settings step shows Done.

Screenshot: the Saved message at the top of Settings.

Step 7. Your logo (optional). Under Logo on statements and receipts, choose a PNG or JPG and press Upload logo.

Check it worked: "Logo saved. Statements, receipts and emails made from now on show it." The logo shows on the page.

Screenshot: the logo section with a logo uploaded.

Further down Settings: Features (newer features, each switched on separately, by the store owner only: see A10, A12, A13 and A15), Who can do what (A11) and Plan.

A3. Open accounts

Either one at a time or by import. The Getting started step is Import your accounts.

Step 1. One at a time: find the customer. Tickbook → Accounts → Add account. Search for the Shopify customer in Their name, email or phone in Shopify, press Find, and click their name under Customers found. If nobody matches, add the customer in Shopify first.

Check it worked: a page headed "Add account:" and the customer's name opens.

Screenshot: Add account, with the customers found.

Step 2. One at a time: set up the account. Set the Credit limit: choose An amount and type it, or choose Unlimited on purpose only. Leave nothing blank: Tickbook asks you to choose. Set the Status (Active or On hold), and an optional old account number in Account number (optional). Press Open account.

Check it worked: the account page opens. Where it stands shows a balance of £0.00, the limit and the credit available.

Screenshot: a new account's page, showing Where it stands.

Step 3. By import: upload your file. Tickbook → Import accounts. Starting from a spreadsheet? Click Download the template and fill it in. An export from your old system works too. Choose it under CSV file and press Upload.

Check it worked: a page headed "Import:" and your file's name opens, at Which column is which?.

Screenshot: Which column is which? after an upload.

Step 4. By import: match the columns. Check each column (name, email, phone, limit, opening balance). Set Dates in the file are written (for example Day/month/year (30/09/2026)), the balance date if the file has none, Balances in the file and A blank credit limit means. Press Match to customers.

Check it worked: the page shows Control totals and the Rows, each matched to a Shopify customer or unmatched.

Screenshot: the Control totals and Rows after matching.

Step 5. By import: check and import. For new customers, press Create customers for all unmatched rows (or Skip all unmatched rows). Check the control totals against your old system. Type Your name, for the import record and press Import (it says how many, for example Import 5 accounts).

Check it worked: the page shows Done, with the Import record. Accounts shows each account with the right balance and limit. On Home, Import your accounts shows Done.

Screenshot: the Done section after an import.

A sample file to practise with is at https://www.tickbook.uk/review/sample-accounts.csv. An import can be undone until its accounts are used, by the store owner only: tick Undo this import, type your name and press Undo import. If Who can do what is on (A11), only chosen staff can open an account with credit or raise a limit.

A4. Add Tickbook to the till (Shopify POS)

Installing the app is not enough on its own. The tile has to be switched on. The Getting started step is Add the Tickbook tile to POS.

Step 1. Activate Tickbook in POS. Shopify admin → Point of Sale → Settings → POS app (the POS editor). In the apps panel, choose Tickbook and turn on Activate on.

Check it worked: Tickbook shows as active in the apps panel.

Screenshot: the POS editor's apps panel with Tickbook activated.

Step 2. Add the tile. On the POS home screen layout: Add tile → Embedded apps → Tickbook, then Save. Reload or reopen POS on the iPad or iPhone.

Check it worked: on the till, add a customer with an account to the cart. The Tickbook tile shows their balance and credit left. On Home, the POS step ticks itself the first time a till looks up an account.

Screenshot: the till's home screen with the Tickbook tile and a customer on the cart.

Optional: if over-limit, overdue or on-hold sales should need a manager's code, set that up as in A10.

A5. Sell on account at the till (practise once)

Step 1. Check the account. Add items, add the customer, and tap the Tickbook tile. Check the balance and credit left. Type the reference if asked. If the account is on hold, overdue or over its limit, the tile warns, and the cashier taps Acknowledge and continue (or a manager taps Enter a manager's code: A10).

Check it worked: the tile's window shows the account. After a warning, it says "Acknowledged. Continue to Mark unpaid."

Screenshot: the tile's window with the account's figures.

Step 2. Mark unpaid. Take payment with Mark unpaid. The sale goes on their account.

Check it worked: Tickbook → Accounts → that customer shows the sale under its order number and the new balance.

Screenshot: the account page with the till sale on its ledger.

A6. Take account payments

Step 1. At the till. With the customer on the cart: Tickbook tile → Receive payment. Enter the amount (or Pay it all) and the method. To choose what it pays off, switch on Choose what it pays off; otherwise it pays the oldest orders first. Tap the Take button (it shows the amount).

Check it worked: the account balance drops. Orders it pays in full are marked paid in Shopify.

Screenshot: the till's Receive payment screen.

Step 2. In the admin. Tickbook → the account → Receive payment (or Account payments → Receive a payment). Enter the amount and Paid by, leave Email the receipt to the customer ticked, and press Record payment.

Check it worked: the account balance drops and a receipt email goes to the customer.

Screenshot: the Receive a payment page.

A7. Pay on account online

Optional, but most trade shops want it. Follow these in order. Tickbook's Pay on account online page has the same steps and ticks them off. Deactivate Pay on account in Shopify before you uninstall Tickbook: its checkout rule is removed with Tickbook, and Shopify would then offer Pay on account to every customer.

The texts you'll paste into the payment method in step 1:

Additional details: Trade account customers only. If your order is over your credit limit, or your account is overdue or on hold, you can still place it: we'll check it and approve it before it's sent or charged to your account. You'll get an email with your options: pay the amount over your limit by card, pay your balance, or wait for us to approve.

Optional: what customers see after they order. Tickbook doesn't set this; paste it if you like. It goes in the payment method's Payment instructions box, shown on the order confirmation page and email. Tickbook works without it. The text: If this order said "needs approval", it is waiting for us to check it. Nothing is sent or charged to your account until we approve it, and we'll email you either way.

Step 1. Create the payment method. Shopify admin → Settings → Payments → Manual payment methods → Create custom payment method. For Custom payment method name, type Pay on account (exactly this: Tickbook adds the customer's credit or reason itself). For Additional details, paste the Additional details text above, word for word. It shows under Pay on account when a customer chooses it. Tickbook can't set it for you, so this step matters. Tickbook's Pay on account online page shows the same text with a Copy button. Press Activate, then in Tickbook press I've pasted it. Don't write anything like "Charge this order to your trade account": it would contradict "needs approval".

Check it worked: Tickbook says "Thanks. Step 1 is done." and step 1 shows Done. If you named the method something else, type it in The payment method's name, as your customers see it and press Save name (store owner only).

Screenshot: step 1 on Pay on account online, with the Copy button.

Step 2. Let customers sign in. Shopify admin → Settings → Customer accounts. Make sure sign-in links show in the online store and at checkout. Tickbook only knows who the customer is when they're signed in.

Check it worked: step 2 on Pay on account online says "On." and shows Done.

Screenshot: step 2 on Pay on account online, showing On.

Step 3. Add the two trade blocks to your cart page. On Pay on account online, step 2, press Add the trade sign-in reminder to the cart page, then Add the trade account block to the cart page. Each opens your theme editor on the Cart page, in a new tab, with the block already added: check it, then press Save there. (By hand: Online Store → Themes → Customize → Cart → Add block → Apps → Trade account or Trade sign-in reminder.) Trade account shows a signed-in trade customer their credit ("Your trade account: £1,000.00 available."). If the cart is over, it says by how much, that the order will need your approval, and gives links to pay the difference or their balance. Trade sign-in reminder shows signed-out shoppers "Trade account customer? Sign in to pay on account." The two never show together.

Check it worked: signed out, the cart shows the sign-in reminder. Signed in as a trade customer, it shows their credit. Tickbook can't see your theme, so check this yourself.

Screenshot: the cart page with the trade account block.

Step 4. Choose who can pay on account online, and what happens to orders that don't fit. On Pay on account online, step 3: under Approved customers, choose Any customer with an active Tickbook account or Only customers with an active account and this tag (and type the Customer tag). Then set Over the limit online, Overdue online and On hold online: Let them place it for approval (recommended) or Hide Pay on account. With approval, the order is placed, held so it can't be sent, and NOT charged to the account until you press Approve. Set Remind me after (working days) and Decline automatically after (working days), and press Save. Only the store owner can change these.

Check it worked: a green "Saved." message. With a tag, Tickbook checks your customers' tags first; it takes a minute or two.

Screenshot: step 3 on Pay on account online, with the approval choices.

Step 5. Turn the checkout rule on. Pay on account online, step 4. Tickbook turns it on when it's installed. If it isn't on, press Turn on (or Turn back on, or Update).

Check it worked: step 4 says "On. Pay on account is offered to signed-in, approved customers with an account." and shows Done.

Screenshot: step 4 on Pay on account online, showing On.

Step 6. Test it. See Part C. On a development store, use the test switch there, then press I've set it up (mark as done) in step 5.

Check it worked: signed in as a trade customer, checkout shows "Pay on account (£… available)". Signed out, or as a customer without an account, it doesn't show. Step 5 says "Done: order" and its number, "went on an account."

Screenshot: checkout showing Pay on account with the credit available.

A8. Show customers their account, and orders waiting for approval

The Getting started step is Show customers their account online. Your store must use customer accounts, not legacy customer accounts (Settings → Customer accounts). The blocks are added in the checkout and accounts editor (Settings → Checkout → Customize). Tickbook's buttons open it on the right page with Tickbook's blocks ready.

Step 1. The Profile page. Press Open the editor on the Profile page (on Home or Pay on account online). Click + next to Tickbook: balance and approval blocks, choose Profile, and save.

Check it worked: signed in as a trade customer, the Profile page shows their balance at the top, what's overdue and the credit available.

Screenshot: a customer's Profile page with the Tickbook block.

Step 2. The account page, in their menu. In that editor, click + next to the first Tickbook block, Tickbook: trade account page, choose Accounts, then Add to menu. Type the menu label Trade account. Shopify may fill in "Tickbook: trade account page": change it, or your customers will see that. Save.

Check it worked: signed in as a trade customer, the account area shows Orders, Profile and Trade account. Trade account shows their activity and statements to download.

Screenshot: the customer account menu with Trade account.

Step 3. The Thank you and Order status pages. On Pay on account online, press Open the editor on the Thank you page and add Tickbook: order approval (checkout). Press Open the editor on the Order status page and add Tickbook: balance and approval blocks. Save each. (The Thank you block works on every plan except Starter.)

Check it worked: after an order that needs approval, the Thank you and Order status pages say "Waiting for approval from" your shop, and why.

Screenshot: the Thank you page for an order waiting for approval.

Step 4. Tick the step. Tickbook can't see whether a block has been placed. On Home, press Mark as done on Show customers their account online.

Check it worked: the step shows Done.

Screenshot: the Getting started step showing Done.

A9. Statements and emails

Statements are made for every account on your statement day. They're only emailed once you switch that on.

Step 1. Send yourself a sample statement. On Home, press Send yourself a sample statement (the last Getting started step). It makes an open-items statement for your busiest account and emails it to your store's email address, not the customer. The subject starts with Sample in square brackets and the email says the customer wasn't sent it; customers get the same layout.

Check it worked: "Sample statement emailed to" your store's email (or, if email isn't set up, made to print or download). Press Open the sample statement and look at it, including the PDF in your inbox.

Screenshot: the banner after sending a sample statement.

Step 2. Choose how statements go out. Tickbook → Statements. Under Emailing, tick Email statements to customers automatically when they're created when you're ready: it's off when Tickbook is installed. Skip statements with nothing owed and no activity is ticked to start with. If you want reminders, tick Send a reminder when something is overdue (by email, and by text to customers who agreed, if Text messages is on) and set the days. Press Save.

Check it worked: a green "Saved." message. Monthly statements says which day they're created on.

Screenshot: the Statements page's Emailing section.

Step 3. Send one now. Tickbook → the account → Send a statement: choose the Kind (Open items or Between two dates) and press Send statement. To send to everyone, use Send a statement now on Statements, then Every account.

Check it worked: the statement is listed on the account page, with "(emailed)" if it went by email. Emails come from "your shop's name via Tickbook", and replies go to your shop's email.

Screenshot: an account's Send a statement section with a statement listed.

A10. Manager approval (optional)

Instead of a staff acknowledgement, an account sale at the till that's over the limit, overdue or on hold needs a manager's code. Each manager has their own code (6 to 8 digits), so every approval says whose it was.

Step 1. Switch it on. Settings → Features → tick Manager approval for over-limit sales at the till → Save features (store owner only).

Check it worked: Manager approval is added to Tickbook's menu.

Screenshot: Features, with Manager approval ticked.

Step 2. Add your managers. Tickbook → Manager approval. Type the Manager's name and Their approval code (6 to 8 digits), then press Add manager. Only the store owner can add, change or remove codes.

Check it worked: "Manager added. Tell them their code in person; it isn't shown again."

Screenshot: the Managers section with one manager.

Step 3. Till payments (optional). Under Till payments, choose whether a payment taken at the till needs a manager's code over an amount, by chosen methods, or both. Press Save.

Check it worked: the section says which till payments now need a manager's code.

Screenshot: the Till payments section.

Step 4. Try it at the till. Put a customer who is over their limit on the cart, open the tile, tap Enter a manager's code and enter it.

Check it worked: the till says "Approved by" and the manager's name, for example "Approved by Sam". If the tile's window stays open (for a missing reference), it says "Approved by Sam. Continue to Mark unpaid." The approval is listed under Every approval and refused try. If the till is offline or can't reach Tickbook, it falls back to the staff acknowledgement, and the record says so.

Screenshot: the till asking for a manager's code.

A11. Who can do what (optional)

By default everyone with access to Tickbook can do everything. The store owner can choose who may do the riskier things.

Step 1. Turn it on. Settings → Who can do what → Choose who can do what. Tick Only let the store owner, and the people ticked below, do these things. Under each heading, tick who may: Raise a credit limit, or make it Unlimited; Take an account off hold; Approve an order waiting for approval; Record a payment dated more than 7 days ago, or for more than is owed (you set the days); Move credit to Shopify store credit; Email statements to every account. Press Save. Staff appear once they've opened Tickbook; to add someone sooner, type their Shopify user id and press Add.

Check it worked: a green "Saved." message, and the banner says "On: only the people ticked below, and the store owner".

Screenshot: the Who can do what page.

Lowering a limit, putting an account on hold, declining an order, recording an ordinary payment and sending one statement stay open to everyone. Decline also needs the staff member's own Shopify permission to cancel orders.

Some things are always for the store owner only: this page; the feature switches and where accounts are kept; the payment method's name and who needs approval on Pay on account online; manager codes and the till payments rule; connecting and disconnecting Accounting and Xero; undoing an import; writing off a bad debt and reversing a write-off; the audit log CSV; and customer data requests. Anyone else sees "Only the store owner can do this." and is asked to get the owner to do it.

A12. Accounting sync: Xero or QuickBooks Online (optional)

Sends account sales to your books as invoices, and account payments as payments against them. (If Xero keeps your customers' accounts, use Part B instead.)

Step 1. Switch it on. Settings → Features → tick Accounting sync (Xero, QuickBooks Online) → Save features.

Check it worked: Accounting is added to Tickbook's menu.

Screenshot: Features, with Accounting sync ticked.

Step 2. Connect. Tickbook → Accounting → Connect Xero or Connect QuickBooks Online. Sign in and allow access (store owner only).

Check it worked: the page shows your accounting system and organisation.

Screenshot: the Accounting page after connecting.

Step 3. Where things go in your books. Choose the account for sales, for payments, and for write-offs (or None: list each write-off to record by hand). Set Send entries from this date (YYYY-MM-DD). Press Save. Ask your accountant which accounts to use.

Check it worked: "Saved. The first sync runs within the hour, or press Sync now."

Screenshot: the Where things go in your books section.

Step 4. VAT on invoices. Each invoice has a line for each VAT rate in the order. Give each rate its code: for Xero, the Xero tax type for 20% (standard rate), 5% (reduced rate), 0% (zero-rated), Exempt (not taxable in Shopify), and No VAT charged, or out of scope (each shows its default, such as OUTPUT2); for QuickBooks, Choose the QuickBooks tax codes. Press Save. Check these with your accountant.

Check it worked: a green "Saved." message, and each rate shows its code.

Screenshot: the VAT on invoices section.

Step 5. Sync. Press Sync now.

Check it worked: "Syncing. Reload in a minute to see the log." The Sync log lists what was sent, and what's left to record by hand (returns, refunds, adjustments).

Screenshot: the Sync log.

A13. Recurring charges (optional)

Charge the same amount to an account every month, quarter or year: bag storage, a mooring, livery, membership. Tickbook makes a Shopify order for each date, with VAT worked out by Shopify, and it goes on the account (in Xero mode, on an invoice in Xero).

Step 1. Switch it on. Settings → Features → tick Recurring charges → Save features. Tickbook needs your permission to make draft orders: a banner, "Recurring charges needs your permission", appears by the button, so press Give access and switch on and allow it in Shopify's window. Adding, changing or ending a charge needs the same permission as raising a credit limit when Who can do what is on.

Check it worked: Recurring charges is added to Tickbook's menu, and each account page has a Recurring charges section.

Screenshot: Features, with Recurring charges ticked.

Step 2. Add a charge. Open an account → in its Recurring charges section press Add a recurring charge, then fill in the Add a recurring charge form. Give Description (the customer sees it), the Amount, How often (Monthly, Every 3 months or Yearly) and First charge on, and press Add recurring charge. Choose VAT at the standard rate or No VAT charged: Shopify can't put 5%, zero-rated or outside-the-scope VAT on a one-off line, so those aren't offered (ask your accountant). Enter the amount as you'd enter a product's price: with VAT in it if your prices include tax; if they don't, VAT is added on top and the charge shows "£25.00 + VAT = £30.00".

Check it worked: on its date, within a minute or two, the charge shows as Raised, with the order's number, and the account has a sale for it.

Screenshot: the Recurring charges page after a charge is raised.

To stop a charge, press End this charge on its account's Recurring charges page; to skip a date that wasn't raised, use Dismiss the ticked dates. Use Tickbook, not Shopify: a draft order deleted in Shopify is made again.

Dates that weren't raised (a heading on the page). If Tickbook itself was down, a date is raised late, once. A date that fell while recurring charges were switched off, your subscription had lapsed, or a charge paused on hold was on hold isn't raised by itself: it's listed there, where you tick the ones to raise and press Raise the ticked dates, or press Dismiss the ticked dates for the rest.

Emails from Shopify. Each charge is a Shopify order that's Payment pending with Due on receipt terms. Tickbook doesn't send the customer an invoice. Shopify's own payment reminders are a shop setting: they email the customer, on the due date or up to 30 days after, for any order with payment terms. If you've set them up, your recurring charges get them too. To stop that, go to Shopify Settings → Notifications, then Payment reminder → Manage payment reminders, and remove the reminders. Tickbook's own statements and reminders still go out as you've set them.

A14. A bar tab at the till (optional)

For customers who run up rounds through the day (a club, a marina, a golf park). A tab is a name for a run of ordinary account sales: each round goes on the account as usual, marked with the tab's reference. At the end the customer pays the lot at once, or the rounds stay on the account for the monthly statement. There's no switch for it: once the Tickbook tile is on your till (A4), it's there for any customer with a Tickbook account. It isn't offered when Xero keeps the accounts (Part B), when the account is on hold, or when the subscription has lapsed.

Step 1. Open a tab. At the till, add the customer to the cart and tap the Tickbook tile. Tap Open a tab. If you like, type a Tab limit (lower than the account's limit; leave it blank to use the account's), then tap Open a tab again. You need a connection to open a tab.

Check it worked: the till says "Tab" and a reference, for example "Tab K7QX2M opened", and the tab's screen shows "No rounds on the tab yet". Back in the Tickbook window, the tab's reference and total are on its button instead of Open a tab.

Screenshot: the till's tab screen just after opening a tab.

Step 2. Put a round on the tab. Ring up the round and add the customer. In the Tickbook window tap the tab's button, then Put this sale on the tab, then take the sale with Mark unpaid as for any account sale. The tab's reference becomes the sale's reference, so the reference box is greyed and you don't type one. To change your mind before Mark unpaid, tap Take this sale off the tab. A round that would take the tab over its own limit needs the usual approval (Acknowledge and continue, or a manager's code: A10). A round on a tab can't also be taken on approval (A15): the till says so, and you choose one or the other.

Check it worked: the tab's screen lists the round, and "Tab total" and the limit left have moved. In Tickbook, the account shows the sale with the tab's reference.

Screenshot: the tab's screen with two rounds and the tab total.

Step 3. Close the tab. Either tap Close tab: take payment, which opens Receive payment with exactly the tab's rounds chosen: take the payment as in A6, and the tab closes as paid. Or tap Close tab: leave on the account, then Yes, leave it on the account: the tab closes with nothing paid, and the rounds stay on the account for the next statement. Both need a connection.

Check it worked: the till says "Tab K7QX2M paid and closed", or "closed" with the amount left on the account. The tile's button goes back to Open a tab. On the account page, a paid tab's rounds are paid; a tab left on the account has its rounds still owed.

Screenshot: the account page after a tab is closed, showing its rounds.

If a round arrives that doesn't fit (over the tab's limit, or after the tab closed), it goes on the account as a normal sale and Tickbook lists it under Exceptions as Bar tab: round to check.

A15. Goods taken on approval (optional)

For customers who take things home to decide. The sale goes on the account, so it counts against the credit limit, but it isn't owed until they keep it: it's never overdue, can't be written off, and statements show it apart. Not for shops whose accounts are kept in Xero.

Step 1. Switch it on. Settings → Features → tick Goods taken on approval → Save features. Only the store owner can do this. It's off until you do.

Check it worked: Settings now has a Goods taken on approval section with the tickbox Put goods on the account if they're not back by their due-back date. Tick it if anything not back the day after its due-back date should go on the account by itself; leave it clear to be told on Exceptions instead. Press Save.

Screenshot: Features, with Goods taken on approval ticked.

Step 2. Mark a sale at the till. Add the items and the customer, and tap the Tickbook tile. Under Taken on approval, choose when it's due back: 3 days, 1 week or 2 weeks, each shown with its date, for example "1 week · Mon 12 Oct". Then take the sale with Mark unpaid. To undo the choice, tap Not on approval.

Check it worked: the window says "Taken on approval: due back" and the date, with a note that it counts against their limit but isn't owed. Afterwards the account page has a Taken on approval section listing the order and its due-back date, and Where it stands has a "Taken on approval (not owed)" line.

Screenshot: the till's window with a due-back date chosen.

Step 3. Keep it, or take it back. If the customer keeps it, open their account and press Keep: put it on the account beside the order: from then on it's a normal account sale. If it comes back, refund or cancel the order in Shopify as usual: Tickbook sees it and takes it off approval, and nothing goes on the account. If it's only part refunded, it stays on approval for what's left.

Check it worked: the order leaves the Taken on approval section. After Keep, the balance rises by the order's amount; after a refund or cancellation, the balance doesn't change.

Screenshot: the account page's Taken on approval section.

Step 4. Reminders and statements. The day before the due-back date, Tickbook emails the customer a reminder, with a subject starting "Due back tomorrow: order" and the order number. Statements show these orders under Taken on approval, as "On approval, due back" and the date, apart from the balance and not in what's owed. If a due-back date passes and you haven't ticked the box in step 1, Tickbook lists it under Exceptions as Taken on approval so you can ask the customer. An order left on approval for months is also listed, so you can decide with your accountant when it counts as kept or returned.

Check it worked: the reminder arrives, and a statement made after the sale has the Taken on approval heading with the order under it.

Screenshot: a statement with the Taken on approval heading.

A16. Start from your unpaid orders (optional)

Moving from another charge-account app, or from marking orders unpaid in Shopify? Instead of typing balances into a file, Tickbook lists each customer's unpaid and part-paid Shopify orders, and you choose which go on their accounts. No money moves, nothing is written until you've checked the totals, and it can be undone until the orders are used. If you have unpaid orders more than a week old that aren't on an account, Getting started adds a line to its import step, "Bring existing balances across: start from your unpaid orders".

Step 1. Choose the dates and list the orders. Tickbook → Import accounts → Start from your unpaid orders. Choose Orders from and Up to and including, and press List unpaid orders. Shopify lets Tickbook see only the last 60 days of orders, so a banner, "The last 60 days", says so, and the first date can't be earlier. For older unpaid orders, use the CSV import (A3) with an opening balance.

Check it worked: a page headed "Unpaid orders:" with your dates opens, says how many orders it has listed so far, and when it's done shows Control totals and Customers and their orders.

Screenshot: the dates form with the last-60-days note.

Step 2. Tick the orders and set limits. Under Customers and their orders, each customer's unpaid orders have a Take on tickbox, the date, what's Still owed and a Status. Tick the ones that go on accounts. For a customer with no account yet, Tickbook opens one: set Credit limit for the new account (blank: no credit), or tick Unlimited on purpose only. Press Save ticks and limits. Orders Tickbook can't take on aren't offered, each with its reason: cancelled, in another currency, already on an account, paid in full now, a "Pay your balance" payment, or placed for a Shopify B2B company (those stay on Shopify's own payment terms: see Trade customers who are Shopify B2B companies in Part D).

Check it worked: the Control totals change to match: Ticked to go on accounts, Total going on accounts, Left unticked and New accounts to open. Check them against your old system.

Screenshot: the Control totals and the customers' orders, with some ticked.

Step 3. Take them on. Under Take on, type Your name, for the record and press Take on (it shows how many orders, and stays greyed until you've saved your ticks). Each ticked order goes on its customer's account at what's still owed on it in Shopify. If Who can do what is on (A11), opening an account with credit needs the permission to raise a limit. Taken-on orders aren't sent to your accounting system again, because they're already in your books.

Check it worked: the status becomes "Taken on", the Record section shows who did it and when, and each customer's account page shows the order with the right balance. After that each order is an ordinary account sale: paid, cancelled or edited in Shopify, the account follows it.

Screenshot: the Record section after taking the orders on.

Step 4. Undo it if needed. Only the store owner can. On the same page, under Undo, tick Undo this take-on, type Your name and press Undo take-on. Orders paid, refunded, edited or written off since are left alone and listed under "Not undone: these orders have been used since". An order that's undone stays off Tickbook.

Check it worked: a message says how many orders were undone, and the status becomes "Undone" (or "Partly undone" if any were left alone).

Screenshot: the Undo section.

Part B: Xero keeps the accounts

B1. Install and plan

Step 1. Install and approve the plan. As A1.

Check it worked: Tickbook opens on its Home page with a Getting started list.

Screenshot: Tickbook's Home page.

B2. Switch Tickbook to Xero mode

Step 1. Switch it on. Tickbook → Settings → Features → tick Xero is the ledger (online Pay on account only) → Save features. Then under Where accounts are kept, choose Xero for Customers' accounts are kept in, and press Save. Only the store owner can do this, and only while Tickbook has no accounts of its own.

Check it worked: the Tickbook Home page shows a "Xero is the ledger for this shop" banner, and Getting started lists the Xero steps. The menu shows Xero ledger and Customers in Xero.

Screenshot: Settings, Where accounts are kept, with Xero chosen.

Step 2. Choose who can pay on account online. In Settings, under Who can pay on account online (Xero): their Xero contact is in good standing, they have the customer tag, or either. Press Save. Set Default credit limit for new Xero links if you want one, and press Save.

Check it worked: Xero ledger, step 2, describes your rule.

Screenshot: the Who can pay on account online (Xero) section.

B3. Connect Xero

Step 1. Connect. Tickbook → Xero ledger → 1. Connect Xero → press Connect Xero once. Log in to Xero. Choose the right organisation (not Demo Company, unless you're testing). Press Allow access.

Check it worked: "1. Connect Xero" shows Done and "Connected to" your organisation.

Screenshot: the Xero ledger page, connected.

Tickbook → Customers in Xero.

Step 1. Match by email. Press Match by email. Tickbook links each Xero contact to the Shopify customer with exactly the same email. Reload after a minute.

Check it worked: the page says how many customers are linked, and when they were last matched.

Screenshot: Customers in Xero after matching.

Step 2. Link the rest by hand. Under To link by hand, search with Xero contact's name or email, type the email the customer signs in to your shop with, and press Link. The Why column says why each wasn't matched. For example, "3 Xero contacts use this email" means you need to choose the right one.

Check it worked: "Linked." The customer moves to Linked customers.

Screenshot: the To link by hand list.

Step 3. Set credit limits. Under Linked customers, set each customer's credit limit and press Save on that row. A new link starts at your default limit for new Xero links (Settings), or £0.00. At £0.00 they can't pay on account online until you set a limit. Tick Unlimited only on purpose.

Check it worked: each linked customer shows Owed (Xero and online orders), Credit limit, Available, and an Online status such as "Can pay on account" or "Overdue: orders need your approval". Xero ledger, step 3, shows Done.

Screenshot: the Linked customers table.

B5. Who invoices online orders in Xero

Tickbook → Xero ledger → Who invoices online orders in Xero.

Step 1. Choose who invoices. If another app (such as OrderMate) already creates a Xero invoice for each online order, leave Create the Xero invoice for online on-account orders off. If you want Tickbook to create them, tick it, choose the income account in Invoices go to this income account (for example 200 – Sales) and press Save (store owner only).

Check it worked: the page says "Invoices go to" your account, and the box stays ticked after a reload.

Screenshot: the Who invoices online orders in Xero section.

Step 2. VAT on invoices. If Tickbook creates the invoices, give each VAT rate its Xero tax type (each shows its default, such as OUTPUT2), and press Save. Xero works out the VAT. Check these with your accountant.

Check it worked: a green "Saved." message, and each rate keeps the tax type you chose.

Screenshot: the VAT on invoices fields.

B6. Balances from Xero

Step 1. Check how old a balance may be. Balances are read from Xero every 30 minutes (less often when Xero's daily limit is close). Orders need your approval when a customer's Xero balance is older than (minutes): leave it at 60 unless you have a reason, and press Save. If Xero can't be reached, customers aren't let through on an old balance for longer than this: their orders need your approval instead (or Pay on account is hidden, if you chose Hide Pay on account for On hold online).

Check it worked: the section says when balances were last read. Read balances now reads them again.

Screenshot: the Balances from Xero section.

B7. Pay on account online

Step 1. Set it up. Exactly as A7 steps 1–5, on the Xero ledger page's steps 4 to 6: the payment method with the exact paste-in text (then I've pasted it), customer sign-in, the cart blocks (and the A8 blocks), then Turn on for the checkout rule. Deactivate Pay on account in Shopify before you uninstall Tickbook.

Check it worked: steps 4, 5 and 6 on the Xero ledger page show Done ("Thanks. Step 4 is done.", then "The checkout rule is on.").

Screenshot: the Xero ledger page's steps 4 to 6.

Step 2. Test it. See Part C, as a linked customer. The development-store test switch works only when Tickbook keeps the accounts: on a development store in Xero mode, check that Pay on account shows at checkout for a linked customer (and not when signed out), then press I've set it up (mark as done) in step 7, and place a real order on your live (paid) store: a development store can't complete it.

Check it worked: step 7 says "Done: order" and its number, "was counted against a Xero contact." The order shows against them on Customers in Xero. (Marked done by hand: "Marked as set up.", and step 7 shows Done.)

Screenshot: step 7 on the Xero ledger page, done.

B8. If you ever disconnect Xero

Step 1. Disconnect. Tickbook → Xero ledger → Disconnect asks you first ("Disconnect Xero?" → Yes, disconnect). While disconnected, linked customers' online orders need your approval. Reconnecting to the same organisation keeps your links. Connecting a different organisation removes the links, because they'd point at the wrong contacts; their credit limits are kept.

Check it worked: the page offers Connect Xero again, and Customers in Xero shows "Paused (Xero disconnected): orders need your approval".

Screenshot: the Disconnect Xero? question.

Part C: Test before you tell customers (15 minutes)

Use a test customer with your own email address.

Step 1. Give the test customer a small limit. An account (A3) or a Xero link (B4) with a small limit, for example £100, and nothing owed.

Check it worked: the account (or link) shows £100.00 available.

Screenshot: the test customer's account showing £100.00 available.

Step 2. Within the limit. Sign in to your online store as them. Put £50 of goods in the cart and go to checkout.

Check it worked: you see "Pay on account (£100.00 available)", and the text you pasted appears when you choose it.

Screenshot: checkout showing Pay on account (£100.00 available).

Step 3. Over the limit. Put £150 in the cart.

Check it worked: you see "Pay on account: needs approval (£50.00 over your limit)". (The figure is what they'd owe, less their limit: with £20 already owed it would be £70.00.)

Screenshot: checkout showing Pay on account: needs approval.

Step 4. Place the order. Place the £150 order with Pay on account. On a development store, Shopify won't complete an order paid with a manual payment method, so use the test switch: turn on (for testing) Bogus Gateway in Settings → Payments, tap Test Pay on account in the cart's trade account block, and pay with card number 1 (any future expiry date, any security code). Tickbook treats the order as paid with Pay on account. The switch works on development stores only, and only when Tickbook keeps the accounts (not in Xero mode: see B7).

Check it worked: all four of these. Tickbook → Exceptions shows "Approval needed" first, with Approve and Decline. The order in Shopify is on hold, so it can't be fulfilled; if Tickbook couldn't hold it, it's tagged "AWAITING APPROVAL – DO NOT SEND". The account balance hasn't changed. You (the shop) and the customer both got an email.

Screenshot: Exceptions with the Approval needed order at the top.

Step 5. Approve or decline. Press Approve. Or press Decline: the order is cancelled and the customer is told.

Check it worked: Approve says "Approved: put on the account." The balance goes up and the hold is released. A declined order is cancelled in Shopify, and nothing goes on the account.

Screenshot: the message after pressing Approve.

Step 6. At the till (if you use POS). Make a small sale on account for the test customer with Mark unpaid (A5), then Receive payment (A6).

Check it worked: the sale and the payment are on the account, and the balance is back where it was.

Screenshot: the account's ledger with the till sale and payment.

Part D: Day to day

Orders waiting for approval

Step 1. Check Exceptions every day. Orders waiting for approval are at the top, as "Approval needed", with the reason. Press Approve (it goes on the account) or Decline (it's cancelled in Shopify). If nobody decides, Tickbook reminds you, and can decline it automatically, after the working days you set in A7 step 4.

Check it worked: Exceptions says "Nothing to check" when everything's sorted.

Screenshot: the Exceptions page.

Statements, limits and holds

Step 1. Change a limit or put an account on hold. From the account page, Account settings: Credit limit, Status (Active or On hold), then Save. Statements are made on your statement day, and reminders follow for overdue accounts if you switched them on (A9).

Check it worked: "Saved." Every change is recorded in Audit log and exports, with who and when.

Screenshot: the account page's Account settings.

Trade customers who are Shopify B2B companies

Shopify B2B is on every Shopify plan. It gives a company its own prices, payment terms (such as Net 30) and a B2B checkout online. You don't need it to use Tickbook, and Tickbook doesn't need it.

What Tickbook does for these customers that Shopify B2B doesn't:

What Tickbook can't do: Shopify doesn't let apps make a till sale a B2B company's order, at the time or afterwards. A till sale on account shows in Shopify as the customer's order, not the company's, and it's owed on the Tickbook account, not on the company's Shopify payment terms.

So keep each debt in one place:

Write-offs

Step 1. Write off a bad debt. On the account page, under Write off a bad debt, check the Amount to write off, type the Reason (shown on their statement) and press Write off. Only the store owner can do this. It takes the amount off what they owe, oldest sales first. No money comes in, so the orders aren't marked paid in Shopify. With Accounting sync, it goes to your books as a credit note against your bad-debt account, or is listed to record by hand.

Check it worked: "Wrote off" the amount, and "The balance is now" the new balance. The statement shows "Written off:" and your reason.

Screenshot: the Write off a bad debt section after a write-off.

Step 2. Reverse it, if you need to. Type Why it's being reversed and press Reverse (store owner only).

Check it worked: "Write-off reversed. What it wrote off is owed again."

Screenshot: a reversed write-off on the account page.

The Write-offs list and download. Audit log and exports shows each write-off once: what was written off, what has been reversed since (by you, or by Tickbook when Shopify cancels, refunds, reduces or takes payment for the order) and what still stands. The Write-offs CSV changed on 4 October 2026, so check anything that reads it: Amount is now Amount written off, Ledger entry is now Ledger entries (each entry, separated by spaces), Reversed now reads no, in part or yes, and there are new columns Amount reversed, Still written off and What happened.

Staff who aren't the store owner see "Only the store owner can write off or reverse a write-off."

Before you uninstall

Deactivate Pay on account in Shopify before you uninstall Tickbook. Tickbook's checkout rule goes with the app, so every customer could then choose Pay on account, for any amount, with no account or credit limit check.

Step 1. Deactivate Pay on account. In Shopify, go to Settings → Payments. Under Manual payment methods, click Manage next to Pay on account, then Deactivate payment method, and confirm.

Check it worked: Pay on account no longer shows at checkout, for anyone.

Screenshot: Shopify's payment settings with Pay on account deactivated.

Step 2. Export your accounts. Tickbook → Audit log and exports. Under Download (CSV), keep at least Accounts (each account, its limit and balance) and Every ledger entry (every sale, payment and adjustment). Add Account payments and Write-offs if you use them, and The audit log (store owner only) for who changed what. Under Statements, press Statement PDFs (ZIP) for copies of the statements you sent.

Check it worked: you have accounts.csv, ledger.csv and statement-pdfs.zip (and any others you chose) on your computer.

Screenshot: the Audit log and exports page.

Your data is kept for 48 hours in case you reinstall, then deleted. See "If you uninstall Tickbook" at tickbook.uk/support.

Troubleshooting